WDN-01

Touch switch

The WDN-01 device is used to switch on or switch off the light by means of a touch. The switch has a sensor with 1,5 m long wire, which is connected to conductive components of lighting fittings. The WDN-01 switch is supplied with 1 ÷ 14 V DC. It has a PWM output for a direct connection of LED diodes and the output of NO free relay with a maximum load of 5 A. It is possible to switch on / switch off any receiver (conventional light bulbs, halogens) by means of the relay output. Using the PWM output the brightening / dimming function is also available, apart from switching on / switching off. The relay output operates in parallel way with the PWM output. WDN-01 has small casing dimensions and is designed for surface mounting. It is recommended to use WDN-01 to control lighting in the kitchen and bathroom furniture. The device can also be installed on flammable materials, e.g. wood, furniture boards and plasterboard.

Basic parameters

Supply voltage 10÷14 V DC Brightening/dimming functions Device tested in accordance with electromagnetic compatibility Protection class - III Mounting indoor only Surface mounting Protection degree IP – no protection from water penetration, protection from solid penetration diameter 12,5 mm and bigger

Documents and Downloads

Power supply 10 ÷ 14 V DC
Power consumption 0,25 W
Number o channels 1
Output current load PWM – max 2,5 A
Output resolution PWM 9-bit
Relay output current load – max 5 A / 250 V AC
Sensor’s length 1,5 m
Relay contact 1xNO 5 A / 250 V AC 1250 VA AC1
Type of The relay output Volt free - NO
Section of connecting cables Up to 2,5mm2
Ambient temperature range -10° ÷ +55 °C
Protection degree IP20
Overvoltage category III
Dimensions [mm] 47,5 x 47,5 x 20
Weight [g] 55
Reference standard PN-EN 60669, PN-EN 60950, PN-EN 61000